Lot of 28 Ceramic Decals, Bunny w/Skis, "Bunny Slopes", 2" diameter, OLY210

Description

Lot of 28 Bunny w/skis "Bunny Slopes" decals,  2" round
These are brand new, modern quality, ceramic decals from Olympic Enterprises.
These decals have a clear cover coat making them suitable for
fired
ceramics, mosaic tiles, porcelain, glass and jewelry or for
non-fired
applications such as wood, candles, soap, plastic, lampshades, and so much more.   Decals have a semi-transparent quality which means they will show up better on light colored items.
Decal Application:
1.) Wipe your piece to make sure it’s clean before you apply the decal.
2.) If your decal sheet has a protective sheet of paper over it you may remove it and throw it away as it is only used to prevent your decal from sticking to another decal.
3.) Cut around the decal you are using, then place the decal into a container of warm water. The decal will first curl up in the water and then it will flatten out (this will take about 20 seconds).
4.) Once you see that the decal can slide easily off the paper backing it is then ready to slide onto your piece.
5.) Lightly wet the area with warm water where you will be placing the decal, then slide the decal off the paper backing and onto your piece. Adjust your design to the correct position. Work from the middle outward to remove all excess water and air bubbles. We recommend using a squeegee but a paper towel will also work fine.
6.) Then finish with a soft cloth or paper towel to make sure your water has all been removed. Let the decal dry overnight before firing.
The suggested temperatures to fire decals to a glazed piece are as follows:
GLASS - Cone 022° 1069°
REG & GOLD DECALS - Cone 017° 1341°
REG DECALS - Cone 016° 1407°
I had to give up my ceramic business and have to sell my decal collection.