Confetti Embellishment Ceramic Decal Transfer

Description

C
o
n
f
e
t
t
i
Embellishment Ceramic Decal Transfer
One strip measures 18x3.5cm ( 7 x 1.5" ). You will get 5 strips as shown on the picture.
The yellow background is a covercoat helping to
ensure proper coverage of the decals.
Don’t fret!
The tint is in the finish coating and will NOT be visible after the decal has fired.
--------------------------------------------------------------------------------------------------------------------------------------------------------------
CERAMIC DECALS APPLICATION INSTRUCTION
1. Pick out the decoration that you intend to apply. Cut it from the sheet entirely.
2. Place the decal in warm water. The sheet will roll up and then become flat again in 15-20 seconds.
3. Remove the decals from the water. Separate the white sheet from the transfer.
4. Wet the piece with warm water. Put the transfer on the piece and adjust the design to the correct position.
5. Eliminate any excess water and air bubbles from the piece using a squeegee.
6. Let the piece dry overnight at room temperature. The piece will then be ready to use.
7. The suggested temperature to fire the tile is cone 015°, 016° or 017° for the regular decals and 018° for the gold decals.